EconoCoat
Non-Reflective Films
All EconoCoat 2-Ply films are made with two layers of polyesters with total thickness of only 1.5mil or 37.5 microns. Our 2-Ply film is to replace all dyed films for a bigger color range, longer color lasting, and most importantly, to protect the environment.
All of 1-Ply colors can be made into 2-Ply films, or vice versa.
Color choices are as following, but please keep in mind that color is always customizable at IRISFILM, and colors may be off on different computer monitors, please refer to an actual sample for color confirmation.
Shade
Black
Product Code
NR2BK02SRC
Details
Glue Tinted Film
Color
Black 2%
Layer(s)
2-Ply
Reflective
No
Scratch Resistant
Yes
Substrate
PET
Adhesive
PSA
Liner
PET
Max. Width
1.52 (60”)
% Visible Light Transmittance
2
% UV Rejection
98
% Infrared Rejection
25
Thickness
38 Microns (1.52mil)
》JIS Z 0237 Testing methods of pressure-sensitive adhesive tapes and sheets
》ISO 2813 Paints and varnishes – Determination of specular gloss of non-metallic paint films at 20°, 60°, and 85°
》ISO 4892-3 Plastics – Methods of exposure to laboratory light sources – Part 3: Fluorescent UV lamps (Method C)
》Holding Power 25mm x 25mm x 1kg x 24hrs x 23°C (Distance of Displacement)
》Performance results were generated from testing film applied to 1/4” (6mm) clear glass.
》The above data contains only results arrived at after employing specific test procedures and standards exercised by an independent laboratory. The data does not constitute a recommendation for, endorsement of, or certification of the product or material tested. The above data is provided for information purposes only and is not to be considered part of the basis of any bargain or transaction involving IRISFILM products. Since only the end user of this product is aware of the specific condition in which the product is to be used, it is the user’s responsibility to determine whether the product is suitable for that intended use.
》The law on auto or building tint varies by city, state, province, or country. Please check your local laws for films approved for use on vehicles or buildings.
》Performance results were generated from testing film applied to 1/8” (3mm) clear glass.
》Test equipment and test methods are in accordance with Lens Tester Q-2401 and P.D.21.
》Film color may be off on screen or monitors, please confirm colors only on actual samples.